Skip to content

Re-Location Clearance Sale | At least 50% OFF most items! + Free Shipping

How Wide Should a TV Stand Be for Your TV?

Choosing the right TV stand width is not just about making sure the television fits. The stand also affects balance, storage, cable management, and how the entire living room looks.

A useful starting point is to choose a TV stand that is at least as wide as your television. In many rooms, a stand that extends several inches beyond each side of the TV creates a cleaner and more balanced setup.

TV Size Is Not the Same as TV Width

The number used to describe a television is its diagonal screen measurement.

For example, a 65 inch TV is not 65 inches wide. A standard 16:9 65 inch screen is about 57 inches wide before small differences in the frame are considered.

This matters because TV stand sizing should be based on the actual width of the television and the position of its feet.

A simple estimate for a 16:9 screen is:

TV Width = Diagonal Size x 0.872

The actual outside width can vary slightly by model.

TV Stand Width Guide

The table below provides a practical starting point for common television sizes.

TV Size Approximate TV Width Suggested TV Stand Width
43 inch About 38 inches 48 to 54 inches
55 inch About 48 inches 54 to 65 inches
65 inch About 57 inches 60 to 72 inches
75 inch About 65 inches 70 to 84 inches
85 inch About 74 inches 80 inches or wider

These ranges are useful for planning, but they should not replace actual measurements.

Two TVs with the same diagonal size may have different frames, bases, and leg positions.

How Much Wider Should a TV Stand Be?

A TV stand does not have to be dramatically wider than the television.

Even a few extra inches on each side can improve the proportions of the entertainment area.

For example, a typical 65 inch TV is about 57 inches wide. If it is placed on a 68 inch stand, the furniture extends about 5.5 inches beyond each side when centered.

That extra space can also be useful for a soundbar, small speakers, controllers, or decorative items.

If the stand and television are almost exactly the same width, the setup can still work, but it usually looks more compact.

What Size TV Stand Works for a 55 Inch TV?

A typical 55 inch TV is about 48 inches wide.

A stand around 54 to 65 inches wide gives the television some visual space on both sides without requiring a very large piece of furniture.

A smaller option can work well in a bedroom or apartment. A wider stand gives you more room for storage and entertainment equipment.

Always check the TV feet before ordering. Some 55 inch models use a center pedestal, while others have legs close to the outside edges.

What Size TV Stand Works for a 65 Inch TV?

A 65 inch TV is usually around 57 inches wide.

A TV stand in the 60 to 72 inch range is a practical choice for many living rooms.

A 60 inch stand creates a fairly tight fit. A 68 inch or 72 inch stand provides more visible space on both sides and can make a large screen feel more balanced.

This size range also gives you more flexibility if you need space for a soundbar, game console, speakers, or storage.

What Size TV Stand Works for a 75 Inch TV?

A typical 75 inch TV is about 65 inches wide.

For this screen size, a console around 70 to 84 inches wide is a useful starting point.

Large TVs can visually overpower narrow furniture. A wider console creates a stronger base beneath the screen and provides more room for media equipment.

If the TV is wall mounted, the stand does not have to physically support it, but the visual proportions still matter.

Measure the TV Feet, Not Just the Screen

This is especially important when the television sits directly on the stand.

A TV may be 57 inches wide but have feet only 40 inches apart. Another TV with the same screen size may have legs placed much closer to the outer edges.

Before buying, measure three things:

  1. The total width of the TV.
  2. The distance between the outer edges of the TV feet.
  3. The front to back depth of the TV base.

The stand must have enough usable top surface for the entire TV base.

TV Stand Width for a Wall Mounted TV

Wall mounting gives you more freedom.

Because the television is supported by the wall, the console can technically be narrower than the TV.

However, a very small cabinet under a very large screen can look unbalanced.

For a clean living room setup, many people still prefer a console that is close to the width of the television or slightly wider.

Wall mounting can be especially useful in smaller rooms because you can choose furniture based more on storage needs than on the size of the TV feet.

Do Not Forget TV Stand Depth and Height

Width is only one part of the decision.

Depth

Check whether the top surface is deep enough for the television base.

Also measure receivers, game consoles, routers, and other equipment that will be stored inside or on top of the stand.

Height

The height of the stand affects viewing position.

A very tall cabinet raises the screen, while a low media console keeps a large TV closer to seated eye level.

The best height depends on your sofa, TV size, viewing distance, and whether the screen is wall mounted.

Plan Around Your Wall and Room

A TV stand can fit the television perfectly and still be too large for the room.

Measure the available wall before ordering.

Pay attention to doors, windows, outlets, floor vents, baseboard heaters, and nearby furniture.

For example, a 72 inch console may work well with a 65 inch TV, but it may feel crowded on a narrow wall.

The goal is to create enough space for the television without making the furniture dominate the room.

Think About Storage Before Choosing the Width

A wider TV stand can provide more than better proportions.

It may also give you more cabinet space for gaming systems, movies, controllers, routers, and other accessories.

Consider what will actually be stored in the entertainment area.

Open shelves make electronics easy to reach, while closed cabinets can hide cables and everyday clutter.

Cable openings are also worth checking before buying. A wide cabinet can still be inconvenient if power and HDMI cables are difficult to route.

Vanub 68 Inch Multifunctional TV Stand

The Vanub 68 Inch Multifunctional TV Stand is designed for larger living room setups. It measures about 68 inches wide, 15.7 inches deep, and 26.5 inches high. The design combines manufactured wood and metal and includes storage space, adjustable shelving, and an integrated electric fireplace.

Its width makes it a practical option for many 65 inch TV setups. A typical 65 inch screen is around 57 inches wide, so a centered television would leave roughly 5.5 inches of extra stand width on each side. Before placing a TV directly on the cabinet, buyers should still verify the TV base dimensions and weight.

Modern 68 Inch TV Stand Media Console with LED Lights for Living Room

Vanub 48 Inch Three Tier Fireplace TV Stand

The Vanub 48 Inch Three Tier Fireplace TV Stand has a more compact footprint. Its listed width is about 47.68 inches, and the design uses engineered wood with three open shelf levels. It also includes an 18 inch electric fireplace insert with adjustable flame brightness, thermostat control, a timer, and overheat protection.

This size is especially well suited to smaller entertainment areas. A typical 43 inch TV is about 38 inches wide, leaving approximately 5 inches of stand width on each side when centered. The product is listed for TVs up to 55 inches, but a typical 55 inch screen is almost the same width as the stand, so buyers who prefer more space around the TV may want a wider console.

Decorative Modern 48" TV Stand with 18" Insert Electric Fireplace

68 Inch vs. 48 Inch TV Stand

Feature 68 Inch TV Stand 48 Inch TV Stand
Approximate width 68 inches 47.68 inches
Natural TV size match Around 65 inch TVs Around 43 inch TVs
Storage Cabinet and adjustable shelving Three open shelf levels
Fireplace Integrated electric fireplace 18 inch electric fireplace
Best room type Medium to large living rooms Apartments, bedrooms, smaller rooms

Neither size is automatically better.

The right choice depends on the television, wall width, storage needs, and room layout.

Common TV Stand Sizing Mistakes

Choosing by Diagonal TV Size

A 65 inch TV is not 65 inches wide.

Always use the actual width of the television when comparing it with furniture.

Ignoring the TV Base

The screen may fit over the stand while the legs do not.

Measure the complete TV base before ordering.

Buying a Stand That Overwhelms the Room

A wider console can look balanced under a large screen, but furniture should still match the size of the wall and surrounding room.

Final Thoughts

The best TV stand width starts with accurate measurements.

Measure the actual TV width, check the position and depth of the TV feet, and then compare those numbers with the available wall space.

For most setups, choosing a stand that is slightly wider than the television creates a clean and balanced look. A smaller stand can work in compact rooms or with wall mounted TVs, while a wider console gives you more storage and more space around the screen.

The right size is the one that fits the TV, the equipment, and the room together.

Previous Post Next Post
Welcome to our store
Welcome to our store
Welcome to our store